Smart and safe coverage.
In order to prevent contamination during reactions and into the laboratory environment. Due to its excellent stretchability, the DURAN® silicone lid can be used as a cover for a wide variety of containers of different Ø and shapes.
The wide overlapping sides of the silicone lid grips the vessel wall. This is useful, for example during mixing, to avoid leakage or splashing of the reaction medium. Because of the nature of the material, the lids are easy to clean, reusable and offer an environmentally friendly and economical alternative to other types of covers and films.
The silicone lid is suitable for a wide range of applications as it can be used to cover and seal a variety of differently shaped lab containers.
The lid seals flush with the container and protects the contents from dust or splashes. With the help of the integrated pull tabs, the lid can be easily removed by hand or with gloves.
3 different colours make it easy to colour mark different samples. In addition, sample information can be written with a lab marker on the marking field flap to indicate the sample.
The silicone lids are reusable, easy to clean and dishwasher-safe. This results in less waste and a lower environment impact.
Position the edge of the vessel opening in the groove located on the inner surface of the lid.
Hold the silicone lid onto the outer edge with one hand and pull the rest of the lid with the other hand over the entire opening.
To ensure that the silicone lid fits correctly, it must be tightly seated on the vessel.
|Please note that prolonged exposure to a solvent will cause swelling of the material.|
|Product applications with direct solvent contact must be tested and evaluated by the user prior to the start of the test. Furthermore, the relevant health and safety regulations must be observed.|