Turbidity Meter AL450T-IR with Infrared Light Source

AQUALYTIC®  Turbidity Meter AL450T-IR with Infrared Light Source
Turbidity is measured according to EN ISO 7027 by nephelometric means (90° scattered light). The infrared light-source permits measurement of coloured and colour-free samples. The automatic measurement range detection facility (Autorange) enables direct turbidity measurement. A large graphic display, a choice of several different languages and user-friendly operating instructions make the device extremely easy to use.
  • Meets EN ISO 7027.
  • Automatic overall range adjustment with Standard-Set T-Cal.
  • Auto-ranging.
  • High accuracy.
  • Laboratory and mobile use.
  • Real-time clock.
  • Waterproof sample chamber and housing.
  • Keypad: conditional acid and solvent resistant; membrane switch keypad with audible feedback.
  • Auto-Off: automatic switch off approx. 20 min after last key press.
Technical Data:
Light source:IR-LED (860 nm)
Display:graphic display
Memory:capacity 1000 data sets with date, time and registration number
Sample volume:approx. 12 ml
Range:0.01 to 1100 NTU (Auto range)
Resolution:0.01 from 0.01 to 9.99
0.1 from 10.0 to 99.9
1 from 100 to 1100
Accuracy:± 2 % of reading or 0.01 (0 to 500 NTU)
± 5 % of reading (500 to 1100)
Ambient conditions:temperature: 5 to 40 °C at max. 30 to 90 % rel. humidity (non condensing)
Interface:RS 232 for printer and PC connection; 9-pin D-sub-mail connector; data format ASCII
Power supply:7 NiCd rechargeable batteries (type AA / Mignon with 1100 mAh); wall plug mains adapter (input: 100 to 230 V, 50 to 60 Hz; output: 15 V;530 mA) and Lithium battery (CR 2032, 3V) for data storage and real time clock
(L x W x H)
PUOrder StockPrice/Unit/EUR 
 Turbidity meter AL450T-IR70 x 265 x 195approx. 1000*16069353-1,071.00 Add product to Shopping Basket
* Weight incl. batteries and power pack.