This high-precision conductivity meter was developed for continuous on-line temperature and conductivity measurements of the emergent pure or ultra pure water from ion exchange cartridges and also for the monitoring of ring main systems. A clear digital display is given even in the lowest conductivity measuring range. A reference resistance is integrated for automatic balancing prior to each measurement. The meter is additionally equipped with automatic temperature compensation and a stepless limiting value setting for temperature and conductivity. It can also be supplied with a potential- free contact for the direct driving of peripherals, and / or RS232 for documentation and a connecting possibility for a printer. The automatic voltage adjustment from 110 to 230 V makes it usable world-wide.
- Positioning: wall mounting.
Digital conductivity meter with connecting cable and plug power unit, measuring cell and set of 2 hoses, each 1.5 m, R ¾".
|Measuring range:||0.1 to 300 µS / cm|
(automatic switching at 9.99 µS / cm)
|Temperature measuring range:||0.1 to 99.9 °C|
|Conductivity limiting value setting:||stepless, 0.1 to 30 µS / cm|
|Temperature limiting value setting:||stepless, 10 to 40 °C|
|Signal on exceeding of limiting value:||LED display ON / OFF + buzzer|
(both limiting values can be switched off)
|Signalling of a fault message:||green / red alternation|
|Electrical connection:||110 / 230 V, 50 to 60 Hz automatic|
|Housing (W x D x H):||73 x 32 x 141 mm|