Flat Heating Plates for Housings, Switch Cabinets and Devices

Housings with electrical, electronic or mechanical installations are often subject to temperature fluctuations, which lead to condensation, corrosion and leakage currents. In order to guarantee the functional safety of these installation elements, it makes sense and is cost-efficient to create a balanced inside temperature.

This heating consists of an anodised 1.5 mm thick aluminium plate vulcanised onto a 1.5 mm thick silicone heating film. A small amount of space is required thanks to this flat construction and extensive heat radiation is still provided.
  • Low surface temperature.
  • Limited space requirement, just 3 mm thick.
  • Even heat distribution over the whole surface.
  • Without ventilator - no dust whirls.
  • Maintenance-free, long service life.
Technical Data:
Heating element:silicone heating
Surface temperature:with bi-metal 65 / 45 °C controller, higher temperatures can be reached without a temperature controller depending on the environmental conditions
Connection:0.5 m line 2 x 0.75 mm2
Fixing:retainer bracket on TS 35 mounting rail or M4 screws
Protection type / class:IP X4 / 1
Approvals:VDE + UL
Electrical power:40 W, 100 W, 200 W
Mains supply:220 to 240 V, 50 / 60 Hz alternative 115 V, 50 Hz
(L x W x H)
(L1 x W1 x H1)
(L2 x W2 x H2)
PUOrder No.in Stock 
 20none150 x 80 x 1.5134 x 64 x 340 x 60 x 715438191-on demand
 4065 °C150 x 80 x 1.5134 x 64 x 395 x 46 x 1315438192-on demand
 70none200 x 150 x 1.5180 x 130 x 340 x 60 x 715438193-on demand
 10065 °C200 x 150 x 1.5180 x 130 x 395 x 46 x 1315438194-on demand
 80none300 x 200 x 1.5280 x 180 x 340 x 60 x 715438195-on demand
 20065 °C300 x 200 x 1.5280 x 180 x 395 x 46 x 1315438196-on demand