The drum heater is a simple and effective tool to heat up and / or keep 200 l standard drums warm. Drum heaters are used for melting or for viscosity reduction of e. g. fats, oils, resin, paints or soaps. Thanks to its flexible and mechanically robust construction the drum heater carries out its task reliably, even under the strain of daily operations. The drum heater consists of a multi-layer assembly of fibre glass which is thermally and mechanically protected by an insulating layer and a st. steel jacket. All touchable parts are included in the protective measures.
The heater is built in accordance with VDE
0700 Part 1 and inspected in accordance with VDE
0700 Part 500. When not in use, the drum heater can be stored and transported as a flat mat.
- In accordance with the CE Guideline.
- Splash-water protected IP 54.
- Excellent heating transmission.
- Robust construction.
- Mechanically flexible - easy storage.
- Simple assembly.
- Complete with controller.
The drum heater disposes over an integrated PT 100 temperature detector as well as an electronic controlling device with director for individual temperature setting. Alternatively, a drum heater with external electronic regulation with digital display is available. Optionally, a built-in sensor for the detection of the heating-jacket temperature or a diving sensor for the detection of the temperature right at the medium can be connected.
|Heating element:||silicone heater|
|Heater size:||1750 x 240 mm|
|Degree of protection:||IP 54|
|Connector:||exchangeable 3 m silicone line 3 x 1.5 mm2 with shock-proof plug|
|Mounting:||st. steel quick release clamps|
|Electrical power:||1400 W|
|Mains supply:||220 to 240 V AC, 50 / 60 Hz|