Upper- / lower baskets for modules:
For connecting 2 separate module inserts per level; each using half of the usable area. The inserts are slided into the coupling and then snaped into their final position.Upper baskets / mount:
Lower basket / mount:
- Open front side.
- For taking up inserts.
- Integrated spray arm.
- Adjustable height.
- A 101: equipping height 160 ± 30 mm (asymmetrical distribution of the rinsing area).
- A 102: equipping height 205 ± 30 mm (even distribution of the rinsing area).
Modules for lab glassware:
- For taking up Miele half inserts or large-volume goods.
- Equipping height depends on chosen upper basket.
A 303 module for pipettes:
- For taking up lab glassware as e. g. Erlenmeyer flasks, round bottom flasks, lab bottles, graduated flasks and measuring cylinders.
A 304 module for vials:
- Fot taking up measuring- and full pipettes with 98 nozzles.
- Supporting frame for pipettes with a height of 150 mm.
Mobile injector unit A 200:
- For taking up tubes as e. g. centrifuge tubes, vials, test tubes or autosampler tubes.
For taking up 38 pipettes in 3 rows:
A 802 flushing nozzle for injector modules:
- 1st row 10 pipettes - 100 ml; strut spacing holder: 20 mm.
- 2nd row 14 pipettes - 25 ml; strut spacing holder: 26 mm.
- 3rd row 14 pipettes - 10 ml; strut spacing holder: 26 mm.
Is offered when the operator uses powder detergents. They ensure a complete rinsing of powder residues from the dosing compartment and are available separately.A 306 module for measuring cylinders:
- For taking up lab glassware, especially for 4 large-volume measuring cylinders.
- Special contact surface avoids glass damages.
Thanks to the bracket design, large and heavy measuring cylinders are centred and securely fixed during processing. The enforced sloping position of the cylinders supports a good water drainage.
You can use either four 1 to 2 l cylinders, high form, simultaneously (also mixed), or two 1 to 2 l measuring cylinders, low form and additionally two further ones with high form.
|A 300:||8 x injector jets E 352 (6 x 220 mm), 8 x E 354 lockings for jet|
|A 300/1:||8 x injector jets with plastic support ID 220 (6 x 220 mm)|
|A 301:||6 x injector jets with plastic support ID 110 (2,5 x 110 mm), 6 x injector jets E 351 (4 x 160 mm), 6 x lockings for jets E 353, 6 x injector jets E 352 (6 x 220 mm), 6 x lockings for jet E 354|
|A 301/1:||18 x injector jets E 351 (4 x 160 mm), 18 x lockings for jet E 353|
|A 301/2:||18 x injector jets with plastic support ID 160 (4 x 160 mm)|
|A 301/3:||18 x SD-B injector jets for butyrometers|
|A 302:||32 x injector jets with plastic support ID 110 (2.5 x 110 mm)|
|A 302/1:||32 x injector jets E 351 (4 x 160 mm), 32 x lockings for jet E 353|
|A 304:||98 jets (2.5 x 90 mm) with plastic support|