>  >  > Thermostats / Baths
Huber Kältemaschinenbau 
Huber TFT DisplayHuber TACHuber E-gradeHuber ProgrammerHuber USB PortsHuber EthernetHuber RS232Huber SpyControlHuber Plug & PlayHuber Easy ControlHuber Protection +Huber ATEXHuber Heating Power

Dynamic Temperature Control Systems Unistat® - 45 to + 250 °C

Huber  Dynamic Temperature Control Systems Unistat® - 45 to + 250 °C
Huber Dynamic Temperature Control Systems Unistat® - 45 to + 250 °C
Dynamic temperature control systems Unistat® with very good thermodynamic properties and a range of functions to meet the highest demands. They are fitted with the innovative Pilot ONE controller with a 5.7" touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time.

Because Unistats® are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats® are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.
  • Precise and reproducible temperature control results.
  • Fastest heating and cooling rates.
  • Wide temperature ranges with no fluid change.
  • Adaptive temperature control, self-optimising.
  • Powerful circulation pump, adjustable.
  • 2 x USB (Host and Device), Ethernet and RS232 interfaces.
Technical Data:
Permissible ambient temperature:5 to 40 °C
Alarm message:optic, acoustic, relay
Controller:Pilot ONE
Safety class:III / FL
Protection class:IP20
Pressure pump:max. 55 l / min; 0.9 bar
Pump connection:M24x1.5 AG
Max. permissible viscosity:50 mm2 / s
Unistat® tango, tango w, tango wl, 405 and 405w with VPC pressure control.
Mains supply:230 V, 50 Hz
 TypeMax. pressure pumpHeating
Cooling capacity at 250 /
200 / 100 / 0 / - 20 / - 40 °C
(W x D x H)
Order No.PU Availability 
Type without marking = air-cooled.
Type w = water-cooled.
Type wl = water- and air-cooled.
Calibration bath Cal 700 / Huber Kältemaschinenbau
Thermal fluids / Huber Kältemaschinenbau
Com.G@te and POKO / ECS interfaces / Huber Kältemaschinenbau
Control cables / Huber Kältemaschinenbau
Adjustable bases / Huber Kältemaschinenbau