>  >  > Water Analysis

Testomat® 808

Compact analyser for online measurement of water hardness on the principle of 'limit value monitoring with colour change'. It can be used in numerous areas where water hardness needs to be checked, e. g. reverse osmosis plants, boiler feed water supply, soft water for commercial purposes or pure water production plants.
  • State-of-the-art indicator pump system.
  • Self-cleaning measuring chamber.
  • Automatic measurement with low water consumption.
  • Direct error display.
  • Indicator quantity display.
  • External flush valve control.
  • Limit value evaluation / external control.
  • Alarm processing.
  • Internal and external flushing via manual control.
  • 72 h of unsupervised operation possible.
  • 4 to 20 mA interface for defined status and error messages.
  • RS 232 interface for firmware updates.
Technical Data:
Measuring range residual hardness:0.02 to 3 °dH
Display limit violation:green / red LED
Indicator sizes:100 and 500 ml bottles
Ambient temperature:15 to 40 °C
Weight:4350 g
Dimensions (W x H x D):364 x 314 x 138 mm
Protection class:IP 54
Mains supply:24 V, 115 V, 230 V, 50 to 60 Hz
Mains water supply
Operating pressure:1 to 8 bar / 1 x 105 to 8 x 105 Pa (a pressure reducer should be used for the 4 to 8 bar range, lower pressures available on request)
Water temperature:10 to 40 °C (a KCN type cooler should be installed in the branch line for temperatures above 40 °C)
Water inlet and outlet:opaque hose with an external Ø of 6 mm
 TypePUOrder No.in Stock 
 Testomat® 80815433339-on demand
Indicators for Testomat 808 / Heyl