Memmert
Compressor-Cooled Incubators ICP

Ideal at temperatures around zero and below. If rapid and precise alternation between heating up and cooling down times in ramp operation is required, cooled incubators with compressor cooling prove to be in peak form - yet still work extraordinarily quiet. Due to the finely adjusted control technology, temperatures exactly reach the set point values without energy-intensive bursts of power.

Completely enclosed working chamber: cooling and heating units are situated outside the working chamber inside the air jacket temperature control system surrounding the entire chamber interior ensuring quick and precise temperature control. The motor-driven forced air circulation, adjustable in 10 % steps via the ControlCOCKPIT ensures optimum temperature distribution.
  • Integrated energy saving function: no continuous heating against cooling, an intelligent DEFROST function enables defrosting as required.
  • Acc. to 12880:2007-05, EN 61010-1 (IEC 61010-1), 61010-2-010.

AtmoCONTROL - control and logging software
For direct setting parameters as well as process time. Fast and easy programming of complex processes via AtmoCONTROL by means of the mouse or touchpad on the notebook.
  • Reading out, managing and organising the data logger.
  • Saving the log memory in various formats.
  • Online monitoring of up to 32 connected appliances.
  • Optical alarms when the alarm limits individually set at the ControlCOCKPIT are exceeded.
  • Automatic alarm to one or several e-mail addresses.
  • TwinDISPLAY: ControlCOCKPIT with 2 TFT colour graphical displays with touchscreen.
  • Available parameters on the ControlCOCKPIT: temperature, fan speed, exhaust air flap position, programme time.
  • 2 Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error.
  • ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function.
  • Displaying of already logged protocol data on the ControlCOCKPIT (max. 10000 values correspond to approx. 1 week).
  • Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading and implementing programmes and for online logging.
  • Multiple overtemperature protection: electronic temperature monitoring TWW/TWB (protection class 3.1 or 2) and mechanical temperature limiter TB (protection class 1) acc. to. DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over / undertemperature alarm.
  • Intuitive programming and archiving of ramps and programme sequences.
  • Synchronous visualisation of the created programme sequence during programming.
  • Application-specific repeat functions (Loops) can be inserted within a temperature control programme in any place.
  • Simple creation of repeating weekly programmes.
  • Programming, managing and transferring programmes via Ethernet or USB port.
Controller:PID microprocessor control with integrated auto-diagnostic system
Interior:st. steel, material 1.4301 (ASTM 304)sheath
Internals:st. steel grids (size 55: 1 grid, sizes 110 to 750: 2 grids)
Housing:textured st. steel, rear zinc-plated steel, intuitively operated TwinDISPLAY with Multi-Touchscreen; fully insulated st. steel door (from size 450 two leaves)
Connection:mains cable with plug
Installation:Mounted on lockable castors
Interfaces:USB, Ethernet
Technical Data:
Working temperature range (not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over):- 12 to + 60 °C
ICP55: 0 to + 60°C
Setting temperature range:ICP55: - 5 to + 60 °C
ICP110 to 750: - 12 to + 60 °C
Accuracy:0.1 K
 TypeChamber volume
l
Inside dimension
(W x D x H)
mm
Outside dimens­ions
(W x D x H)
mm
Load
capacity,
max.
kg
PUOrder No.in Stock  
ICP5553400 x 330 x 400585 x 514 x 11538015432156-Login / Registration
ICP110108560 x 400 x 480745 x 584 x 123315015432157-Login / Registration
ICP260256640 x 500 x 800824 x 684 x 155220015432158-Login / Registration
 ICP4504491040 x 600 x 7201224 x 784 x 161320015432159-Login / Registration
ICP7507491040 x 600 x 12001224 x 784 x 195020015432160-Login / Registration
Inside dimensions: depth less 33 mm for fan.
Outside dimensions: depth without door handle, depth of handle 56 mm. Height with castors.
Further options such as a chamber modification for reinforced perforated st. steel shelves / grids or entry ports are available on request. Extra equipment has to be stated with the order directly.
Accessories:
Accessories for series U, I, S, ICH, ICP, IPP, IPS, HPP, HCP / Memmert