Memmert  Incubators - Series INB, INE, INP, IFE, IFP

Memmert
Incubators - Series INB, INE, INP, IFE, IFP

Series INB, INE, INP with natural air circulation.
Series IFE und IFP with ventilator unit.

In 3 performance classes: BASIC - EXCELLENT - PERFECT.
  • From 30 °C (min. 5 °C above ambient temperature), up to 70 °C.
  • Homogeneous uniformity by large-area heating on four sides.
  • Shelves: st. steel, 1 grid for size 200 and 300, 2 stainless steel grids from size 400.
  • St. steel door against extra charge full-sight glass door (EXCELLENT / PERFECT), from size 600 two-leaf door.
  • Acc. to DIN 12880: 2007-5, 50011, EN 61010.
  • Standard ovens are safety-approved and bear the test marks of GS, VDE, EMV, CE and GOST.

BASIC (INB):
  • With electronic PID-controller.
  • 1 Pt100 sensor DIN class A in 4-wire-circuit.
  • Integrated digital timer from 1 min to 99 h 59 min.
  • Digital display of setpoint and actual temperature as well as residual running time.
  • Resolution of display: 0.5 °C.
  • Double overtemperature protection by additional relay, following the setpoint with 3 °C difference and temperature limiter TB class 1.

EXCELLENT (INE / IFE):
  • PID-microprocessor-control with fuzzy-support.
  • 2 Pt100 sensors DIN-class A in 4-wire-circuit, for monitoring each other.
  • Digital real-time / weekly programme timer with day group function, precise minute setting.
  • Timer with residual running time for profiles with up to 40 ramps, each 1 min up to 999 h.
  • Loop-function to repeat profile (1 to 99 times or endless).
  • Digital display of all parameters, e. g. temperature, weekday, time, program status, set-up values.
  • Resolution of display of setpoint and actual values: 0.1 °C.
  • Integrated GLP-conforming long-term documentation via ring memory as datalogger.
  • Serial interface RS232 incl. Memmert software "Celsius" for programming and documentation of a nearly unlimited no. of ramps.
  • Incl. works calibration certificate at 37 °C.
  • Triple overtemperature protection: additional relay switches off heating about 3 °C above setpoint value. Digital electronic overtemperature controller TWW, protection class 3.1. Optional: adjustable temperature limiter. Mechanical temperature limiter TB protection class 1 to switch off heating at about 10 °C above max. oven temperature.

PERFECT (INP / IFP):
  • Adaptive, fuzzy-supported multifunctional digital PID-microprocessor controller.
  • Adjustment of pre-heated fresh air by air flap through process controller in 10 % steps for each segment individually.
  • 2 Pt100 sensors DIN class A in 4-wire circuit for monitoring each other.
  • Digital 7-day-programme timer, precise min setting.
  • Digital timer for profiles with up to 40 ramps, each 1 min up to 999 h.
  • Multifunctional programming via menu on 8-digit alphanumeric display - language to be chosen via set-up.
  • Digital display of all parameters, such as temperature, week-day, time, air flap position, programme status, set-up values.
  • Resolution of setpoint and actual values: 0.1 °C.
  • Integrated GLP-conforming long-term documentation via ring memory as datalogger.
  • Parallel printer interface for all PCL3-compatible ink jet printers.
  • Serial interface RS232 incl. Memmert software "Celsius" for programming and documentation of a nearly unlimited no. of ramps.
  • MEMory Card XL for programming and documentation of up to 40 ramps.
  • 2nd chip card as STERICard with fixed sterilisation cycle (4 h / 160 °C) to sterilise the working chamber.
  • Incl. works calibration certificate at 37 °C.
  • Multiple overtemperature protection: with audible and visible alarm. Electronic overtemperature controller TWW protection class 3.1 or adjustable temperature limiter TWB class 2 to be selected in set-up by customer. ASF Automatic Safety Function for over- and undertemperature following the setpoint value at a freely selectable tolerance range. Mechanical temperature limiter TB class 1.
Technical Data:
Temperature deviation at 37 °C:temporal: ± 0.05 °C,
spatial: better than ± 0.6 °C
Working chamber:st. steel 1.4301, (ASTM 304) deep-drawn
Housing:textured st. steel, rear zinc-plated steel
Doors:inner glass door, outside st. steel door
Mains supply:230 V (± 10 %), 50 / 60 Hz
 
 TypeChamber volume
l
Inside dimension
(W x D x H)
mm
Outside dimens­ions
(W x D x H)
mm
Weight
approx.
kg
PUOrder No.in Stock Price/Unit/EUR 
INE 40053400 x 330 x 400550 x 480 x 68035155373141 on demand 
Outside dimensions: depth without door handle, depth of handle 38 mm.
IFE and IFP models: dimensions of working chamber on incubators with fan the depth is reduced through the air duct in the middle of the back wall 30 mm up to size 600, 45 mm size 700 / 800.