ISMATEC
Pump-Heads for Gear Pumps REGLO-Z, REGLO-ZS, BVP-Z, MCP-Z, MCP-Z Process

To operate a magnetically coupled gear pump application specific pump-heads are required, a magnet and 2 tube connectors. There are many different pump-head models available. Permissible temperature - 45 to + 177 ºC. For pumps with Teflon® gears: Please state an operating temperature above 54 °C when placing the order.
Please note: The flow rate depends on the model.
  • Max. system pressure: 21 bar.
  • SERVICE-KITS are also available.
Gear material:
PPS:polyphenylene sulphide
G:graphite (carbon)
PTFE:polytetrafluoroethylene
Housing material:stainless steel SS 316
X

Item added to basket.

ISMATEC Pump-Heads for Gear Pumps REGLO-Z, REGLO-ZS, BVP-Z, MCP-Z, MCP-Z Process

 TypeGear
material
Flow rate
ml / min
Max.differential
pressure
REGLO // BVP / MCP
bar
PUOrder No.in Stock 
 Z-120PTFE32 to 39502 // 3.515828320-Login / Registration
 Z-130PPS32 to 39502 // 5.215828330-Login / Registration
 Z-140PTFE32 to 39502 // 3.515828340-Login / Registration
 Z-142PTFE55 to 5480- // 3.515828342-Login / Registration
 Z-150PPS32 to 39502 // 5.215828412-Login / Registration
 Z-181G2.1 to 2522.8 // 2.815828413-Login / Registration
 Z-183G4.2 to 5042.8 // 2.815828414-Login / Registration
 Z-186G0.85 to 991.4 // 1.415828415-Login / Registration
 Z-1830PPS4.6 to 5605.2 // 5.215828418-Login / Registration
 Z-200PPS35 to 3509- // 5.215828416-Login / Registration
 Z-201PPS73 to 7241- // 3.515828417-Login / Registration
Flow rate depends on gear pump drive.