ISMATEC
Peristaltic Pump Drives MCP-Standard / MCP-Process

ISMATEC  Peristaltic Pump Drives MCP-Standard / MCP-Process
Flow rate range from 0.001 to 3700 ml / min (depending on the mounted pump-head).
Pumping and filling in one pump, microprocessor controlled, with ultra-precise speed control and dispensing function. For 1 to 24 pump channels. Speed (2 to 240 min-1) is precisely controlled to 0.1 % and can be programmed using the membrane key-pad and LCD display. A wide variety of dispensing modes delivers highly accurate and reproducible results. With interfaces (RS232) for PC control and foot switch. Can be used for sterile dispensing (up to 135 °C) with suitable tubing material.

Programmable functions:
  • ml / min.
  • Drive speed.
  • Dripfree due to roller backsteps.
  • Calibration of ml / min (flow rate) and ml (volumes).
  • Drive start / stop.

Dispensing by:
  • Volumes ml.
  • Volumes / time unit.
  • Dispensing time (0.1 to 999 h).
  • Interval dispensing by time / volumes with a pause.
  • Supplied without pump-head.
Technical Data:
Dimensions (W x D x H):157 x 260 x 230 mm
Weight:6.9 kg (Process)
6.4 kg (Standard)
Mains supply:230 V / 50 Hz

Additional functions in MCP-Process:

4-program memory for PC-programmed application profiles
dust tight, protected against water jets (IP 65)
programming a number of dispensing cycles
 TypeProtection
class
PUOrder No.in StockPrice/Unit/EUR 
 MCP-ProcessIP 6515828510-on demand