With the vacuum sampler MiniSampler, the sample liquid only comes into contact with the suction hose and the original sample bottle. The possibility of cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed. The disposable suction hose can quickly be replaced. This guarantees that the samples are never contaminated. If necessary, a new hose can be used for every single sample. Due to its small Ø (8 mm), the hose can reach narrow, seemingly inaccessible sampling areas.
PE MiniSampler for general sampling:
MiniSampler PE in transport case, incl. vacuum pump, 10 PE bottles, 100 ml, 10 m PE suction hose 6 x 8 mm, 1 hose cutter, 1 st. steel hose weight made of V2A (1.4301), 20 seal-it bottle seals.
PTFE MiniSampler for ultra-pure sampling:
MiniSampler PTFE in transport case, incl. vacuum pump, 1 sample bottle PFA 180 ml, 5 m PTFE suction hose 6 x 8 mm, 1 hose cutter, 1 st. steel hose weight made of V2A (1.4301), 20 seal-it bottle seals.
|MiniSampler, PE, in transport case||5303970||1||Login / Registration||-|
|MiniSampler, PTFE, in transport case||5435269||1||Login / Registration||-|
|Sample bottle, PE, 100 ml||5303971||1||Login / Registration||-|
|Sample bottle, PE, 250 ml||5303972||1||Login / Registration||-|
|Suction hose, PE, 8 mm Ø, reel of 100 m||5303973||100||Login / Registration||-|
|* Depending on the medium.|